Warehouse Cooling

The temperatures in your warehouse tend to get very high and it has led to losses of inventory. You have tried using fans but they don’t make much of a difference – they only cool items that are closest to them. What can you do make sure that temperatures inside your warehouse are controlled at all times? It may be time for you to start thinking about installing warehouse cooling systems.
Many business people are reluctant to install these sorts of systems in warehouses because they don’t own them, and they figure that it is the responsibility of the owner of the building to make the necessary installations. Here is what you should take into account: your landlord is going to be reluctant to install anything he doesn’t have to and even if he eventually gets to it many months will have passed by, and all the while you will be losing inventory.
Landlords, however, are not opposed to tenants making such installations and then slowly recouping their expenses from the rent. You should talk to your landlord about bringing a warehouse cooling expert in to make an assessment and give you recommendations. If you agree that the cost of the cooling system is fair you can go ahead with the installation and then pay less rent for the coming months to make up for the money that you spent. You landlord will be agreeable because the cooling system increases the value of his property.
It is important to make sure that you get a high quality system installed so make sure you look for companies that deal specifically with cooling for warehouses. One such company is the Cambridge Renewable Energy Centre. They have a variety of cooling systems available and they are experts at installation and maintenance. You can find out more on their website, http://cambridgeenergycentre.co.uk/.


3 Benefits To Using A Monobloc Air Source Heat Pump

Introduction
When it comes to heating your home, you have several options. However, these options are not all created equal. Choosing the right heating source may not seem like something that is at the top of your priority list. Most people heat their homes just fine using standard methods and using ones that are most common in their area. The problem with this is that they end up inadequately heating their homes and racking up insane electric bills. For this reason, it is recommended that you use a monobloc air source heat pump. There are many benefits to using this type of heating. Below is a list of three benefits to using an air source heat pump.
Benefits of Using A Air Source Heat Pump
Environmentally Friendly
Massive Reduction In Electric Bill
Easy Installation and Maintenance
Environmentally Friendly
One of the biggest benefits of using a monobloc air source heat pump is just how eco-friendly they are. They use heat that is extracted from cold air to heat your home. Because of this, there are little to no carbon emissions are given off. This is the only type of heat pump that can easily heat your entire house without having an environmental footprint.
Massive Reduction In Electric Bill
For those who do not care about being eco-friendly, you can at least care about your electric bill. Everyone is looking to save money and this is one of the absolute best ways. Over the course of time, you can save tens of thousands of dollars just by switching to a monobloc air source heat pump.
Easy Installation and Maintenance
The first question that most people have when it comes to this is about how easy it’s going to be to install and maintain. These types of heat pumps rarely break down and need maintenance. This is a huge benefit to those who are not well-versed in handyman work.


Metal Etcher

You are just starting a small manufacturing business and are in the market for a metal etcher – which kind should you choose? There are two kinds of metal etchers – those who use hard tooling to create parts and those who use photo etching. Those who do photo etching are much better than those who do hard tooling for several reasons.

The first is that hard tooling tends to compromise the metal sheet. The process requires the use of heavy tools and lots of force which can lead to cracks and tears. Any parts made from such metal sheets can be easily compromised, affecting quality of production and even leading to serious accidents.

The other benefit of metal etching is that it is faster than hard tooling. With just a few simple steps you will get parts ready to go. The metal is cleaned before the etching is done so that once the process is complete the parts are ready for use. Parts produced this way do not have burrs so there is no time wasted de-burring them.

Photo etching is also the way to get the most precise parts as it is highly accurate. Even with highly complicated parts design you will be able to get parts that are only +/-.01 mm from the actual measurements. This process can be used to produce one piece or millions which makes it ideal for small businesses as they don’t have to etch parts that they don’t need. The process is also highly affordable – you don’t have to worry about paying lots of money to get your machinery going.

To conclude, you are better off with a metal etcher who uses photo etching such as Qualitetch. They have been etching metal for more than 25 years so you can trust that they will do an excellent job.


Air Source Heat Pump Efficiency

As the world’s population continues to grow, the energy demands all across have continued to become so difficult to sustain. It is in that light why we opted to provide our clients with a broad range of energy efficient equipment and carry on investment in a renewable energy showroom that mainly demonstrate all these equipment.

Air source heat pump efficiency have continued to be on the rise, and therefore the production of such useful equipment is also attaining an all-time high.

This dramatic rise in energy costs has serious effects on the environment. Its impact and effect are being felt everywhere.

Most governments all over the world have been focused on addressing these emerging issues and even provide different incentives meant for end users. These incentives will take advantages of certain new technologies that have been made available to tackle renewable technology that promotes the decreased costs and be able to meet sustainable energy levels.

We have various initiatives and services that are meant to assist your business in making some changes in the surrounding. We have opened various renewable energy showrooms in various global cities, and they are all dedicated to saving energy both at homes and working environments.

For a very long time, businesses and individuals alike have always been looking for alternative ways they can use to meet cooling and heating needs and the same time-saving costs. There have been various traditional methods that are available for consumer requirements, but these ancient technologies have witnessed increased costs in the whole world.

This also brings a higher demand on energy reserves and ecology.

In the city of Cambridge, there is a renewable energy centre that is a home of innovative ideas and various viewable products. These ideas and products are meant at ensuring that you not only see but also measure how you can easily make an efficient energy cost savings. They also give you an opportunity to benefit from the reusable energy fully and assist your business in contributing to an ecosystem that is more sustainable.

Some of the equipment are air conditioning, solar hot water, desertification fans, heat recovery, under floor heating and others.